Microwave Type | IP microwave over Native Ethernet/PWE3 Ethernet | ||
Frequency Band | 59-64 GHz | ||
Duplex Mode | TDD | ||
Channel Bandwidth | 200 MHz | ||
Modulation Scheme | QPSK, 16QAM, 32QAM | ||
Port Type | Auxiliary port | USB port, NMS port | |
Service port | Two fixed GE electrical ports, one of which can serve as a power over Ethernet (P&E) port | ||
Capacity | • Maximum air-capacity bandwidth: 600 Mbps | ||
• Maximum air-interface throughput: 1.6 Gbps | |||
• Switching capacity: 8 Gbps | |||
RF Configuration | 1+0 | ||
Service Type | • Native Ethernet: E-Line, E-LAN | ||
• PW-based Ethernet services: E-Line, E-Aggr, E-LAN (VPLS) | |||
NMS | NCE, Web LCT, SNMP | ||
Ethernet OAM | IEEE 802.1ag, IEEE 802.3 ah, ITU-T Y.1731 | ||
Key Features | AM, ATPC, TDD, Automatic Frequency Selection, ERPS, QoS/HQoS,Bandwidth Notification, TWAMP Light, Anti-theft | ||
Clock Features | • Supported clock sources: microwave link clock, synchronous Ethernet clock | ||
• IEEE 1588v2 time synchronization | |||
• ITU-T G.8275.1 time synchronization | |||
Power Supply Mode | P&E, generally used in conjunction with the RTN PI | ||
Antenna Type | Built-in panel antenna | ||
Antenna Gain | 36 dBi | ||
Dimension | 192.5 mm x 192.5 mm x 70 mm | ||
Weight Typical Power | 2.5 kg | ||
Consumption | 20 W | ||
Environment | • Temperature: -33ºC to +55ºC | ||
• Humidity: 5% to 100% |